28

Section 3: Basic Installation

AXIS 5400 User’s Manual

 

 

 

OS/2 Windows NetWare

UNIX Macintosh

Using Follow the instructions below to set the IP address of your AXIS 5400 AXIS IP Installer using the AXIS IP Installer:

Important! You should not use AXIS IP Installer to set the IP address of the AXIS 5400, if you have an active DHCP server in your network.

1.Download the AXIS IP Installer to your host. The software is available on the AXIS Online CD and on the Axis home page at http://www.axis.com/.

2.Connect the AXIS 5400 to the network. Note the serial number that is located on the underside label of the AXIS 5400. You will need it in the proceedings steps.

3.Start the AXIS IP Installer.

4.Click the serial number of your AXIS 5400 that appears in the server list.

5.Enter the desired IP address in the designated IP address field and click the Set IP address button.

6.The IP setting process will take approximately 10 to 40 seconds. Click OK in the confirmation box that appears when the IP address has been set.

Notes: AXIS IP Installer uses the BOOTP and DHCP protocols to communicate with the AXIS 5400. Make sure that at least one of these protocols is enabled in your print server.

Restart your AXIS 5400, if it does not show up in the server list.

Page 29
Image 29
Axis Communications 5400 user manual Basic Installation