
136 | Section 11: Upgrading the Software | AXIS 5400 User’s Manual |
|
|
|
OS/2 Windows NetWare
UNIX Macintosh
Note: ❏ Should you encounter any problem that prevents a successful upgrade over your network, it may become necessary to perform the flash loading operation via the parallel port, LPT1. In this case, you are advised to contact your dealer.
Upgrading using This method is recommended for upgrading the flash memory in AXIS NetPilot NetWare networks. An Upgrade Wizard is available to guide you
through the necessary procedures.
Follow the instructions below to upgrade your print servers:
1.Obtain the firmware file, using one of the methods presented on page 133.
2.Put the file in the AXIS NetPilot ‘Upgrade’ folder. This folder resides in the same folder as the AXIS NetPilot program and was created when AXIS NetPilot was installed on your client.
3.Start the Upgrade Wizard by clicking on the Upgrade icon on the AXIS NetPilot toolbar.
4.Proceed the installation by following the instructions that are presented to you in the Upgrade Wizard.
If you need more information, please refer to AXIS NetPilot