
34 | Section 4: Setting Up - NetWare | AXIS 5400 User’s Manual |
|
|
|
NetWare
Section 4 Setting Up - NetWare
This section describes how to continue the installation of the AXIS 5400 in the NetWare environment. Identify which transport protocol you are running on your network and which installation method you should use. Continue the installation by selecting the appropriate installing instructions from the table below:
Installation |
| Transport |
| Action |
method |
| protocol |
| |
|
|
| ||
|
|
|
|
|
NDPS |
| TCP/IP |
| See Setup using NDPS, on page 35 |
|
|
| ||
|
| IPX/SPX |
| Proceed with Installing the AXIS 5400 in NDPS environments, on page 36. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| If you have performed the basic installations as described in Basic Setup |
|
| IPX/SPX |
| with AXIS NetPilot, on page 21, the AXIS 5400 is already installed for |
|
|
|
| printing in the NetWare environment. |
Queue based |
|
|
|
|
|
|
|
| |
| IPX/SPX |
|
| |
printing |
|
| If you need a more advanced installation that is not covered by the AXIS | |
|
| Advanced |
| NetPilot Installation Wizard, continue with Advanced Installation using AXIS |
|
| configuration |
| NetPilot, on page 38. |
|
|
|
|
|
|
|
|
|
|
|
| Pure IP |
| See Basic |
|
|
|
| |
|
|
|
|
|
If you intend to operate your AXIS 5400 in a
Section 5 Setting Up - Windows, on page 44
Section 6 Setting Up - OS/2, on page 70
Section 7 Setting Up - Macintosh, on page 76
Section 8 Setting Up - UNIX, on page 82