
96 | Section 8: Setting Up - UNIX | AXIS 5400 User’s Manual |
|
|
|
UNIX
Read Back Port (PRx_IN) has the default setting of AUTO. However, it is required that the printer also supports
Please refer to your printer documentation for further details regarding
Example: Follow the instructions below to disable the
1.Select the Printer1 Web page.
2.Set the Read Back Port parameter to NONE.
3.Click the Submit Printer1 settings button.
Debugging using the When hex dump mode is activated, the print data is printed as Hex Dump Mode hexadecimal byte values rather than characters; printer control
commands are also printed as hex values. This allows you to inspect what control and print characters are being sent to the printer, which is a useful debugging facility for the more difficult printing problems.
Example: Follow the instructions below to activate the hex dump mode for PR3:
1.Select the Printer3 Web page.
2.Set the Hex Dump Mode Enabled radio button to YES.
3.Click the Submit Printer3 settings button.
Note: ❏ The page length for hex dump printouts is determined by the lines per page value of the PostScript page format parameter.