52 | Section 5: Setting Up - Windows | AXIS 5400 User’s Manual |
|
|
|
Windows NT4.0 and Windows 2000
Windows
Installing TCP/IP Install the AXIS Print System software on your Windows NT 4.0 Printers in Windows workstation, if you have not already done so. AXIS Print System can
NT 4.0/2000 be downloaded from the AXIS Online CD or from the Axis WWW home page at http://www.axis.com/.
To enable printing in the TCP/IP environment, you must ensure that the TCP/IP protocol is enabled on your client.
The set of instructions you should use to install TCP/IP printer ports is dictated by the IP address of your AXIS 5400:
•If you have an active DHCP server on the network or if you have already set the IP address of the AXIS 5400 using another method, you should follow the installation instructions presented in Installing TCP/IP Printer Ports, on page 54.
•If your AXIS 5400 is not assigned with a valid IP address, you should follow the installation instructions presented in Installing TCP/IP Printer Ports and Setting the IP Address, on page 52.
Installing TCP/IP
Printer Ports and
Setting the IP Address
Follow the instructions below to install an AXIS Raw TCP/IP printer port and set the IP address of the AXIS 5400, using AXIS Print System:
1.Start AXIS Print System by selecting AXIS Print System from the Start menu.
2.AXIS Print System starts. Select Search for newly connected print server... and click Next>.
3.Read the instructions and click Next>.
