SYSTEM TROUBLE ERROR CODES

Your control panel is capable of detecting a variety of troubles that may affect system performance. In the unlikely event that a problem should occur, the SYS TBL (system trouble) icon will display on the left side of keypad window along with one or more of the following error codes. If the problem is related to a specific zone or device, the corresponding number will also be indicated. Below is a list of the most common troubles along with the necessary corrective action, if any. If a message appears that is not listed below, call your security professional for service. When a system trouble occurs, the keypad can be silenced and the display can be cleared by pressing C. The system can then be armed and disarmed as usual.

Note: If you cannot clear a system trouble yourself, call installing company for service as soon as possible.

Trouble

System Trouble

Action

Indication

Condition

 

 

 

 

E01-00

AC Power Failure

This trouble will occur if AC power is not present. Make sure system transformer is plugged into

 

 

AC receptacle and check the circuit breaker, otherwise call installing company for service.

 

Low Battery

If there has been a recent power failure, the battery may be partially depleted and must be

E02-00

 

recharged by the control panel. The control panel performs an automatic daily test of the

 

 

battery, at which time the trouble will clear if the battery has been recharged.

 

 

If the trouble does not clear in 24 hours, call installing company for service.

 

 

 

 

Communication

The system was not able to report to central station. If this is due to a temporary interruption in

E03-00

Failure

the telephone service, the trouble can be cleared when the service is restored by performing a

 

 

Communication Test:

 

 

1 While disarmed, enter your User Code followed by A.

 

 

2 Answer NO (F) until “ACTIVATE DIALER TEST” appears in the window.

 

 

3 Press YES (E) to send a test signal to the central station.

 

 

If the trouble continues, call installing company for service.

33

Page 33
Image 33
Napco Security Technologies GEM-DXRP1 manual System Trouble Error Codes, Trouble System Trouble Action Indication Condition

GEM-DXRP1 specifications

Napco Security Technologies has long been a reputable name in the security solutions industry, and the GEM-DXRP1 is a testament to that legacy. This state-of-the-art digital communicator is designed to enhance the security infrastructure of any facility or residence, bridging the gap between traditional alarm systems and advanced monitoring technologies.

One of the standout features of the GEM-DXRP1 is its enhanced communication capabilities. It utilizes both digital and IP-based communication to ensure reliable and seamless interaction between security panels and central monitoring stations. This dual communication approach significantly improves the reliability of alarm signals and provides users with peace of mind knowing that their security system is always connected.

The GEM-DXRP1 supports advanced technologies such as GSM, allowing for cellular monitoring and providing an additional layer of redundancy to traditional landline systems. In an era where connectivity and immediate response are crucial, the use of GSM technology allows for instant communication of alarm signals, ensuring timely responses to emergencies.

Another notable characteristic is its user-friendly interface. The device features easy-to-navigate programming capabilities, making it simple for installers to integrate it into existing security systems. The intuitive design also aids users in accessing vital system information and configuring settings without complicated procedures.

Additionally, the GEM-DXRP1 is equipped with robust security features. It supports encrypted communication, protecting transmitted data from unauthorized access, thus ensuring the integrity of alarm signals and user information. This focus on security reflects Napco’s commitment to providing not only functionality but also safeguarding user privacy.

Compatibility is another critical aspect of the GEM-DXRP1. The device can be integrated with various Napco security panels, making it a versatile choice for upgrading existing systems. Its scalable design allows for future expansion, accommodating additional zones and devices as security needs evolve.

In conclusion, the GEM-DXRP1 by Napco Security Technologies exemplifies modern security technology with its enhanced communication capabilities, user-friendly interface, and robust security features. As security concerns continue to grow, tools like the GEM-DXRP1 offer essential solutions for both residential and commercial applications, ensuring that safety is always a top priority. With its blend of reliability, functionality, and security, the GEM-DXRP1 stands out as a valuable addition to any security infrastructure.