SETTING THE ALARM ( ARMING) WHEN LEAVING
SYSTEM TROUBLE
SYS/TRBL
L O W B AT TE R Y
SYS/TRBL
C AN ’ T AR M S YS TE M P R E SS R E SE T K EY
SYS/TRBL
EXIT TIME 060 PLEASE LEAVE NOW
CAN’T ARM SYSTEM AREA X IN TROUBLE
System Trouble
If you attempt to arm with a “SYSTEM TROUBLE” display alternating with an indicated trouble code (e.g.
condition. Be sure to call for service as soon as possible.
Area Arming (Optional)
Some systems may be divided, or partitioned, into smaller independent subsystems, which are referred to as Areas. In a system that has been partitioned into multiple areas, one or more area may be armed while others remain disarmed.
Manager's Mode (Optional)
The Manager's Mode allows the user to arm / disarm other areas in a partitioned system. To arm/disarm a different area:
1.Press the numerical key representing the other area number.
2.Press Gfollowed by J. The keypad will now provide status and control of that area.
3.Enter your User Code followed by J to arm or disarm the area.
4.Press Gfollowed by J to return to the home area.
Global Arming (Optional) (Not available with
To arm all areas simultaneously, press 9, Gand enter your code followed by J. To disarm all areas simultaneously, press 0, Gand enter your code followed by J.
•The User Code must be valid in all area(s).
•If any zone is not secured, the keypad will display “CAN’T ARM SYSTEM, AREA X IN TROUBLE”, where X indicates the number of the Area in trouble. All faulted zones in the respective area(s) must be secured or bypassed. Note: If a system trouble is indicated, the system cannot be armed using this method.
7