82 | Section 8: Setting Up - UNIX | AXIS 5400 User’s Manual |
|
|
|
Section 8 Setting Up - UNIX
Installation in the UNIX Environment
UNIX
Having performed the basic TCP/IP setup procedures as defined in Assigning an IP address, on page 25 and onwards, you are now able to print in interactive mode using LPR, FTP or Reverse Telnet protocols.
However, should you require to integrate the AXIS 5400 into your host spooler, you can use the Axis automatic installation script axinstall. This utility software is resident on the AXIS 5400 and can be downloaded to your host using FTP, so no disks are required. The axinstall script can also be downloaded from the Axis WWW home page at http://www.axis.com/ and it is available on the AXIS Online CD.
Having completed this operation, the printer connected to the AXIS 5400 will appear as though they are directly connected to the host printer spooler.
If you intend to operate your AXIS 5400 in a multiprotocol environment, you should also proceed according to one or more of the following sections, as appropriate to your network.
Section 4 Setting Up - NetWare, on page 34
Section 5 Setting Up - Windows, on page 44
Section 6 Setting Up - OS/2, on page 70
Section 7 Setting Up - Macintosh, on page 76
