USER GUIDE
23. Set Time & Date
The time and date set is used when recording log events (see page 37). To set the time and date:
From the menu, select Time & Date, Figure 26 appears.
Figure 26 Set Time & Date
Type the appropriate parameters.
24. Backup & Restore
You can backup all configuration data and restore it at a later date. To do so: From the menu select Backup & Restore, Figure 27 appears.
Figure 27 Backup & Restore
To backup the configuration data, click 
. And save the file.
To restore the configuration data, browse to locate the file and press Apply, the device restarts.
25. Saving changes and logging out
To save any configuration changes click the relevant button on the current page.
This could be 
or just 
.
To restart the Smart 216 IP press 
.
To exit the Configuration menu and close the session, click 
.
Only one Administrator can log into the Configuration area at a time. After the idle Timeout – see section 18 page 22 – the session terminates.
26
