Lenovo 4304493 manual Settings, Base Model, and Install Application, 2-15

To install the sound function of the stereo model, follow these steps :Windows 95

1Insert the Option Diskette into the diskette drive.

2	Open	File	Manager	, select the diskette drive, and double click
on	the fileSETUP.EXE.
3	Run	Install Driver		and Install Application	according to the
instructions			on	the screen.

4When the installation is complete, restart your computer.

	For	more	information	on	how to	use	the	stereo	model, see
	“Using Sound Functions (Stereo Model						Only)” on		page	2-34.
Optional		Device	Driver	Settings
You	can	specify	the following		options	for	use	with	the	CD-ROM drive
device	driver:
DEVICE=C:\CD2ðX\PCMCD2ðX.SYS /I:nn /P:nnn /D:aaaaaaaa
/I:nn		IRQ level.		An IRQ number is assigned to the sound
		function (decimal).
/P:nnn		I/O base address. The sound function is mapped from
		this address (hexadecimal).

This

section

contains

installation

instructions

for

the

base

model

and

the

stereo

model

separately. Follow

the

instructions

for

your

model.

Attention

Do not interrupt the system during installation.

Close all other applications before installing the device driver.

Base Model

1Turn on your computer.

2After connecting the PC Card to the CD-ROM drive with the

	interface		cable,	turn	on	the	power	switch of	the	CD-ROM drive.
	Then	insert the		PC	Card	into the		PC Card	slot	on your
	computer.
3	The	New	Hardware Found				dialog box is displayed.			Follow
	the	instructions		in	the	dialog	box.

/D:aaaaaaaa Device name. The name specified for the device should be the same as for the MSCDEX.

4Insert the Option Diskette (provided) into the diskette drive.

5 Check that the diskette drive (for example,	A:\) has been
selected; click on OK .

6You may get a message stating that the driver on your system is

a newer version than the one on the Option Diskette. If this

Part 2: User's Guide 2-15