Onkyo TX-NR1007 instruction manual 137, Controlling a DVD Player or DVD Recorder

Controlling Other Components—Continued

Controlling a DVD Player or DVD Recorder

By pressing the REMOTE MODE button that’s been programmed with the remote control code for your DVD player (HD DVD, Blu-ray, or TV/DVD combination), you can control your player with the following buttons. The [DVD/BD] button is preprogrammed with the remote control code for controlling an Onkyo DVD player.

For details on entering a remote control code for a differ- ent component, see page 134.

The [DVD/BD] button is preprogrammed with the remote control code for controlling a component that

supports the *1. The component must be able to

receive remote control commands via and be connected to the AV receiver via HDMI. If controlling

your component via doesn’t work very well, program your component’s remote control code into the [DVD/BD] button and use the DVD/BD remote mode to control your component.

Press the appropriate

REMOTE MODE button first.

al

*2 When you want to change the remote controller mode without changing the current input source, press the [MODE] button and within about eight seconds, press the REMOTE MODE button. Then, with the AV receiver’s remote controller, you can control the component corresponding to the button you pressed.

aON, STANDBY buttons

Sets the DVD player to On or Standby.

bTV [9] button

Set the TV to On or Standby.

cTV [INPUT] button

Selects the TV’s external inputs.

dTV VOL [q]/[w] button

Adjust the TV’s volume.

eTOP MENU button

Displays a DVD’s top menu or a DVD’s title.

fArrow [q]/[w]/[e]/[r] and ENTER buttons

Used to navigate menus and select items.

gSETUP button

Used to access the DVD player’s settings.

h[1], [3], [2], [5], [4], [7], [6] buttons

Play, Pause, Stop, Fast reverse, Fast forward, Previ- ous, and Next.

i REPEAT button

Used with the repeat playback functions.

*2

b c d e f

m

n o

p

jSEARCH button*

Used to search title, chapter, and track numbers, and to search times for locating specific points.

kNumber buttons

Used to enter title, chapter, and track numbers, and to enter times for locating specific points. The [+10] button* works as a +10 button or “--/---” button.

lDISPLAY button

Displays information about the current disc, title, chapter, or track, including elapsed time, remaining time, total time, and so on.

g	q
	r
h
i	s
j	t
k
	u

*1 The supported by the AV receiver is the CEC system control function of the HDMI standard.

mMUTING button (64)

Mutes or unmutes the AV receiver.

nCH +/–, DISC +/– button

Selects discs on a DVD changer. Selects TV chan- nels on a component with a built-in tuner.

oVOL [q]/[w] button (62)

Adjusts the volume of the AV receiver.

pMENU button

Displays a DVD’s menu.

qRETURN button

Exits the DVD player’s setup menu or returns to the previous menu.

rAUDIO button*

Selects foreign language soundtracks and audio for- mats (e.g., Dolby Digital or DTS).

sRANDOM button*

Used with the random playback function.

137