Onkyo TX-NR1007 Digital Coaxial in 1, 2, Ethernet, Remote Control, RS232, Monitor OUT, Zone 2 OUT

Front & Rear Panels—Continued

dDIGITAL COAXIAL IN 1, 2, and 3

These coaxial digital audio inputs are for connect- ing components with coaxial digital audio outputs, such as CD and DVD/BD players. They’re assign- able, which means you can assign each one to an input selector to suit your setup. See “Digital Audio Input Setup” on page 51.

eETHERNET

This port is for connecting the AV receiver to your Ethernet network (e.g., router or switch) for playing music files on a networked computer or media server, or for listening to Internet radio.

fu REMOTE CONTROL

This u (Remote Interactive) jack can be con- nected to an ujack on another Onkyo AV compo- nent. The AV receiver’s remote controller can then be used to control that component. To use u, you must make an analog audio connection (RCA) between the AV receiver and the other AV compo- nent, even if they are connected digitally.

gRS232

Terminal for control.

hHDMI IN 1–6, OUT MAIN, and OUT SUB

HDMI (High Definition Multimedia Interface) con- nections carry digital audio and digital video.

The HDMI inputs are for connecting components with an HDMI output, such as a DVD player, Blu- ray Disc Player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “HDMI Input Setup” on page 49. The HDMI outputs are for connecting a TV or pro- jector with an HDMI input.

iMONITOR OUT

These S-Video and composite video jacks should be connected to a video input on your TV or projector.

jCOMPONENT VIDEO IN 1, 2 and 3

These RCA component video inputs are for con- necting components with a component video out- put, such as a DVD player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Component Video Input Setup” on page 50.

kCOMPONENT VIDEO MONITOR OUT

These RCA component video outputs are for con- necting a TV or projector with a component video input.

lZONE 2 OUT

This composite video output can be connected to a video input on a TV in Zone 2.

mFM ANTENNA

This jack is for connecting an FM antenna.

AM ANTENNA

These push terminals are for connecting an AM antenna.

nAC INLET

The supplied power cord is connected here. The other end of the power cord should be connected to a suitable wall outlet.

oGND screw

This screw is for connecting a turntable’s ground wire.

pPHONO IN

These analog audio inputs are for connecting a turn- table.

qCD IN

These analog audio inputs are for connecting a CD player’s analog audio output.

r12V TRIGGER OUT ZONE 2

This output can be connected to the 12-volt trigger input on a component in Zone 2. When Zone 2 is turned on, a 12-volt trigger signal is output.

12V TRIGGER OUT ZONE 3

This output can be connected to the 12-volt trigger input on a component in Zone 3. When Zone 3 is turned on, a 12-volt trigger signal is output.

sTV/TAPE IN/OUT

These analog audio inputs and outputs are for con- necting a TV or recorder with an analog audio input and output (cassette, Mini Disc, etc.).

tGAME IN

Here you can connect a game console, etc. Input jacks include S-Video, composite video, and analog audio.

uCBL/SAT IN

Here you can connect a cable/satellite receiver, set- top box, etc. Input jacks include S-Video, composite video, and analog audio.

vVCR/DVR IN/OUT

Here you can connect a VCR or DVR (digital video recorder). Input and output jacks include S-Video, composite video, and analog audio.

wDVD/BD IN

Here you can connect a DVD/BD player. Input jacks include S-Video, composite video, and analog audio. You can connect a DVD/BD player’s 2-chan- nel analog audio output.

12