Kramer Electronics VS-88HN user manual Kramer Protocol 3000 Commands

11.2Kramer Protocol 3000 Commands

	Command		Short		Description		Permission
			Form
#				Protocol handshaking		End User
BUILD-				Read device build date		End User
DATE?
CPEDID				Copy EDID data from the output to the		End User
				input EEPROM
DISPLAY?				Read if output is valid		End User
FACTORY				Reset to factory default configuration
GETEDID				Read EDID data		User SW Internal
GETEDID-				Read EDID data from external device		User SW Internal
EXT				connected to output
HELP				List of commands		End User
IDV				Visual identify device		End User
INFO-IO?				Read in/out count		End User
INFO-PRST?				Read maximum preset count		End User
LDEDID				Load EDID data		User SW Internal
LOCK-FP		LCK		Lock front panel		Administrator
LOCK-FP?		LCK?		Read Lock front panel		End User
MODEL?				Read device model		End User
P2000				Switch to protocol 2000		End User
PROT-VER?				Read device protocol version		End User
PRST-LST?				Read saved presets list		End User
PRST-RCL				Recall saved preset		End User
PRST-STO				Store current connections to preset		End User
PRST-VID?				Read video connections from saved		End User
				preset
RESET				Reset device		Administrator
SIGNAL?				Read if input is valid		End User
SN?				Read device serial number		End User
VERSION?				Read device firmware version		End User
VID				Switch Video only		End User
VID?				Get Video switch state		End User

VS-88HN - Protocol 3000 31