Kramer Electronics VS-88HN

VS-88HN - Operating the VS-88HN 8x8 HDMI Matrix Switcher

4. Highlight either Internet Protocol Version 6 (TCP/IPv6) or Internet

Protocol Version 4 (TCP/IPv4) depending on the requirements of your IT

system.

5. Click Properties.

The Internet Protocol Properties window relevant to your IT system appears

as shown in Figure 6 or Figure 7.

Figure 6: Internet Protocol Version 4 Properties Window

Contents

Main USE R MAN UAL Page Page 1 Introduction 2 Getting Started ! 2.1 Achieving the Best Performance 2.2 Safety Instructions ! 2.3 Recycling Kramer Products 3 Overview 3.1 Defining the VS-88HN 8x8 HDMI Matrix Switcher Page Page 3.2 Using the IR Transmitter 4 Installing in a Rack 5 Connecting the VS-88HN 8x8 HDMI Matrix Switcher Page 6 Operating the VS-88HN 8x8 HDMI Matrix Switcher 6.1 Switching an Input to an Output 6.2 Acquiring the EDID 6.2.1 Acquiring the EDID from One Output 6.2.2 Acquiring the EDID from Different Outputs to Different Inputs 6.2.3 Acquiring the Default EDID 6.3 Storing and Recalling a Setting 6.4 Resetting the IP Parameters 6.5 Switching Between Protocol 2000 and Protocol 3000 6.6 Connecting via RS-232 6.7 Connecting via Ethernet 6.7.1 Connecting the Ethernet Port directly to a PC i Page Page 6.7.2 Connecting the Ethernet Port via a Network Hub or Switch 6.7.3 Control Configuration via the Ethernet Port 6.8 Upgrading the Firmware 7 Technical Specifications 8 Default Communication Parameters 22 VS-88HN - Default EDID 9 Default EDID VS-88HN - Default EDID 23 Page 10 Kramer Protocol 2000 26 VS-88HN - Kramer Protocol 2000 Input Description Definition for Specific Instruction Page 11 Protocol 3000 i 11.1 Kramer Protocol 3000 Syntax 11.1.1 Host Message Format 11.1.1.1 Simple Command 11.1.1.2 Command String 11.1.2.1 Device Long Response 11.1.3 Command Terms 11.1.4 Entering Commands 11.1.5 Command Forms 11.1.6 Chaining Commands 11.1.7 Maximum String Length 11.2 Kramer Protocol 3000 Commands Page !