Manuals / Brands / Computer Equipment / Printer / Kramer Electronics / Computer Equipment / Printer

Kramer Electronics VS-88HN 6 Operating the VS-88HN 8x8 HDMI Matrix Switcher

1 36

Download 36 pages, 1.51 Mb

VS-88HN - Operating the VS-88HN 8x8 HDMI Matrix Switcher

11

6 Operating the VS-88HN 8x8 HDMI Matrix Switcher

This section describes how to:

 Switch an input to an output (see Section 6.1)

 Acquire the EDID (see Section 6.2)

 Store and recall switch settings (see Section 6.3)

 Reset the VS-88HN (see Section 6.4)

 Switch between Protocol 2000 and Protocol 3000 (see Section 6.5)

 Connect to the VS-88HN via RS-232 (see Section 6.6)

 Connect to the VS-88HN via Ethernet (see Section 6.7)

 Upgrade the firmware (see Section 6.8)

6.1 Switching an Input to an Output

To switch an input to an output:

 Press an output button followed by an input button to switch the selected

input to the selected output

6.2 Acquiring the EDID

You can acquire the EDID from any of the following:

 One output set to one or more of the eight inputs (see Section 6.2.1)

 Different outputs set to different inputs (see Section 6.2.2)

 The default EDID (see Section 6.2.3)

Note: Attempting to acquire the EDID from an output that does not have a display

device connected to it results in the default EDID being acquired.

Contents

Main USE R MAN UAL Page Page 1 Introduction 2 Getting Started ! 2.1 Achieving the Best Performance 2.2 Safety Instructions ! 2.3 Recycling Kramer Products 3 Overview 3.1 Defining the VS-88HN 8x8 HDMI Matrix Switcher Page Page 3.2 Using the IR Transmitter 4 Installing in a Rack 5 Connecting the VS-88HN 8x8 HDMI Matrix Switcher Page 6 Operating the VS-88HN 8x8 HDMI Matrix Switcher 6.1 Switching an Input to an Output 6.2 Acquiring the EDID 6.2.1 Acquiring the EDID from One Output 6.2.2 Acquiring the EDID from Different Outputs to Different Inputs 6.2.3 Acquiring the Default EDID 6.3 Storing and Recalling a Setting 6.4 Resetting the IP Parameters 6.5 Switching Between Protocol 2000 and Protocol 3000 6.6 Connecting via RS-232 6.7 Connecting via Ethernet 6.7.1 Connecting the Ethernet Port directly to a PC i Page Page 6.7.2 Connecting the Ethernet Port via a Network Hub or Switch 6.7.3 Control Configuration via the Ethernet Port 6.8 Upgrading the Firmware 7 Technical Specifications 8 Default Communication Parameters 22 VS-88HN - Default EDID 9 Default EDID VS-88HN - Default EDID 23 Page 10 Kramer Protocol 2000 26 VS-88HN - Kramer Protocol 2000 Input Description Definition for Specific Instruction Page 11 Protocol 3000 i 11.1 Kramer Protocol 3000 Syntax 11.1.1 Host Message Format 11.1.1.1 Simple Command 11.1.1.2 Command String 11.1.2.1 Device Long Response 11.1.3 Command Terms 11.1.4 Entering Commands 11.1.5 Command Forms 11.1.6 Chaining Commands 11.1.7 Maximum String Length 11.2 Kramer Protocol 3000 Commands Page !