Extron electronic MVX 88 Series manual N On 4-output switchers, this button and LED stand alone

Models: MVX 88 Series

1 84
Download 84 pages 63.57 Kb
Page 23
Image 23
NOn 4-output switchers, this button and LED stand alone.

I

Audio Setup LED — The Audio Setup LED lights red to indicate that the

 

switcher is in Audio Setup mode. See “Adjusting input audio gain and

 

attenuation” on page 3-18.

 

Alternate IR error function — The Audio Setup LED also indicates errors

 

when you use an IR 501 small matrix remote control. The LED lights for

 

approximately 1 second when the switcher receives an unexpected or out-

 

of-sequence IR command from the remote control. The switcher otherwise

 

ignores the command.

J

Down (<) button and LED — The < button decreases the audio gain for a

 

selected input. Press and release the button to decrease the gain by 1 dB or

 

press and hold the button to decrease the gain by 3 dB per second until the

 

button is released or the lower limit is reached.

NOn 4-output switchers, this button and LED stand alone.

On 8-output switchers, this button and LED are secondary functions of the Output 7 button and LED.

 

The < LED flashes once in Audio Setup mode to indicate each 1 dB decrease in

 

the input audio gain. See “Adjusting input audio gain and attenuation” on

 

page 3-18.

 

The < LED lights steadily in Audio Setup mode to indicate that the adjustment

 

has reached the maximum attenuation (-18 dB).

K

Up (>) button and LED — The > button increases the gain for a selected

 

input. Press and release the button to increase the audio level by 1 dB or press

 

and hold the button to increase the audio level by 3 dB per second until the

 

button is released or the upper limit is reached.

NOn 4-output switchers, this button and LED stand alone.

On 8-output switchers, this button and LED are secondary functions of the Output 8 button and LED.

The > LED flashes once in Audio Setup mode to indicate each 1 dB increase in the input audio gain. See “Adjusting input audio gain and attenuation” on page 3-18.

The > LED lights steadily in Audio Setup mode to indicate that the adjustment has reached the maximum gain (+10 dB).

PRELIMINARY

MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation 3-5

Page 23
Image 23
Extron electronic MVX 88 Series manual N On 4-output switchers, this button and LED stand alone, Preliminary