Extron electronic MVX 88 Series manual Using Emulation mode, Master-Reset selection, Preliminary

PRELIMINARY

Remote Operation, cont’d

Master-Reset selection

Master-Reset clears all ties and presets, clears all video and audio mutes,

sets all input audio gain to unity gain (+0 dB), and sets all output levels to the factory default (professional level, +4 dBu).

Using Emulation mode

Emulation mode allows you to set up the software without attaching the switcher to the computer. To use Emulation mode, do the following:

1.Click Start > Programs > Extron Electronics > Matrix Switchers > MATRIX Switcher + Control Pgm.

2.Choose Emulate, and click OK.

3.Choose an emulation file to open, and click OK. The file DEMO.MTX provides a sample of a completed matrix setup. The file NEW.INI provides a blank setup to get you started.

4.Enter the file name under which you want to save any changes to the file, and click OK.

5.Select 1, 2, or 3 as the number of video boards, 1 or 2 as the number of audio boards, and MVX Series as the matrix model for which you are preparing a configuration; and click OK (figure 4-17).

Figure 4-17 — Emulation mode configuration

6.Continue using the program as described in steps 3 through 7, beginning on page 4-14.

4-22 MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation