Extron electronic MVX 88 Series 27 - Select the preset, Example 7 Recall a preset, Preliminary

2. Press and release the Input 1 button (figure 3-27).

All LEDs except Input 1 and the Preset LED go out. The Input 1 LED and Preset LED remain lit for 1 second to indicate the saved preset number and then go out.

Press and release the Input 1 button to select preset 1.

1 2 3

Preset 2 Preset 3

All LEDs except the saved preset's LED go out.

			INPUTS	OUTPUTS
1	2	3	4	3	4	PRESET

The LED for the saved preset and the Preset LED remain lit for 1 second then go out.

Figure 3-27 — Select the preset

Example 7: Recall a preset

The following steps show an example in which a preset is recalled to become the current configuration. The example shows the front panel indications that result from your actions.

1. Press and release the Preset button (figure 3-28).

Press and release the button.

PRESET

The LED lights to indicate Recall Preset mode.

All input and output buttons with assigned presets light. If you then recall the configuration from an unlit preset number, all ties will be cleared.

		INPUTS				OUTPUTS
1	2	3	4	1	2	3	4

Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8

= lit LED, = unlit LED.

Figure 3-28 — Select Recall Preset mode, MVX 44

PRELIMINARY

MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation 3-17