Extron electronic MVX 88 Series manual Preliminary, Remote Operation, cont’d, RGB delay, Resets

PRELIMINARY

Remote Operation, cont’d

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description
RGB delay
Set RGB delay	EX@*X1!D}	OutX@•DlyX1!]
Example:	E5*7D}	Out5•Dly07]	Set the RGB delay for a tie to
			output 5 to 3.5 sec (7 x 0.5 sec.).
Read RGB delay	EX@D}	X1!]
Example:	E6D}	05]	Output 6 delay is 2.5 sec
			(5 x 0.5 sec.).
Front panel lockout (Executive mode)
Lock front panel	1X	Exe1]	Enable executive mode.
Unlock front panel	0X	Exe0]	Disable executive mode.
View lock status	X	X#]
Resets
Reset global presets	EZG}	Zpg]	Clear all global presets.
Reset one global preset	EX(ZG}	ZpgX(]	Clear global preset X(.
Reset audio input levels	EZA}	Zpa]	Reset all audio input levels
			such that the output is 0 dB.
Reset audio output levels	EZV}	Zpv]	Reset all audio output levels
			to the professional level.
Reset all mutes	EZZ}	Zpz]	Unmute all video and audio
			outputs.
Reset all RGB delay settings	EZD}	Zpd]	Reset all RGB delays to 0
			seconds.
Reset whole switcher	EZXXX}	Zpx]	Clear all ties, global presets,
			and mutes and reset all
			audio gains to the factory
			default.
Firmware upload
Upload firmware	Eupload	See “Loading firmware using SIS commands” on the next
		page.
Information requests
Information request	I	VX$XX@•AX$XX@]	V (video) matrix size•
			A (audio) matrix size
Example (MVX 84 VGA):	I	V8X4•A8X4]	8 RGB and audio inputs and
			4 RGB and audio outputs.
Request part number	N	nn-nnn-nn]	See appendix A for part #s.
Example (MVX 88 VGAA):	N	60-638-21]	MVX 88 VGA A part # is
			60-638-21.
Query controller firmware	Q	X1@]
version
Example:	Q	1.23]	The factory-installed
			controller firmware version
			is 1.23 (sample value only).

N X@= Output number	1	– (maximum number of outputs for your model)
X1!= RGB delay in ½ second increments (10 [5 seconds] maximum)
X#= Front panel lock	1	= on (locked)
X(= Global preset #	0	= off (unlocked)
	00 - 16 (00 = current configuration)
X$= Input number	1	– (maximum number of inputs for your model)

X1@= Controller firmware version number to second decimal place

4-10 MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation