Manuals / Extron electronic / Computer Equipment / Switch

Extron electronic MVX 88 Series Operations, Powering up the switcher, Creating a set of ties

Models: MVX 88 Series

1 84
Download 84 pages 63.57 Kb
Page 24
Image 24

PRELIMINARY

Operation, cont’d

Operations

The following paragraphs detail the power-up process and then provide sample procedures for creating ties, sets of ties, and configurations; changing a configuration; viewing ties, sets of ties, and configurations; saving a preset; recalling a preset; viewing and adjusting the audio level; and selecting the front panel security lockout.

Powering up the switcher

1. Plug in the switcher. On all switcher models, power is automatically applied

when the power cord is connected to an AC source. When AC power is applied, the switcher performs a self-test and initialization that sequences the front panel LEDs on and off from left to right. A successful power up self-test and initialization leaves the power LED on, the Video and Audio LEDs on, and all other LEDs off.

The current configuration, all presets, and all input audio levels are saved in non-volatile memory within 5 seconds of a change or exiting Audio Setup mode. When power is applied, the most recent configuration is retrieved. The previous presets remain intact.

NWait at least 5 seconds after changing any configuration, saving a preset, or exiting Audio Setup mode. Before 5 seconds have elapsed, changes that you have made may not have been saved.

 

If an error occurs during the self-test, the switcher locks up and does not

 

operate. If your switcher locks up on power-up, call the Extron S3 Sales &

 

Technical Support Hotline.

2.

Plug in all system components and turn on the input devices (such as

 

computers or HDTV set-top boxes) and the output devices.

3.

Set the input devices to output video using each device’s own operating

 

instructions.

4.

Create a tie (see below). The selected input image should appear at the

 

selected output. If no image appears, see “Troubleshooting” on page 3-26.

Creating a set of ties

You can create a set of ties, changing the current configuration, by using the front panel buttons. Change the current configuration as follows:

1.

Select to configure video, audio, or both by pressing the I/O button as

 

necessary.

2.

Select the desired input and output(s) by pressing the input and output

 

buttons.

3.

Press and release the Enter button.

4.

Repeat steps 1 through 3 to create additional ties until the desired

 

configuration is complete.

N• Only one video input and one audio input can be tied to an output.

•If a tie is made between an input and an output, and the selected output was previously tied to another input, the older tie is broken in favor of the newer tie.

•Output LEDs light when an input is selected to indicate current ties. Press and release the associated output buttons to clear unwanted outputs.

3-6 MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation

Page 23 Page 25
Page 24
Image 24
Extron electronic MVX 88 Series manual Operations, Powering up the switcher, Creating a set of ties
Page 23 Page 25

MVX 88 Series specifications

The Extron MVX 88 Series is a cutting-edge technology solution designed to facilitate seamless audio and video signal routing in a variety of settings, from educational institutions to corporate environments. This versatile matrix switcher series supports the demanding needs required for high-performance AV distribution.

One of the key features of the MVX 88 Series is its ability to handle multiple input and output formats, including HDMI, VGA, and composite video, ensuring versatility in connecting various devices. It supports resolutions up to 1920x1200 at 60 Hz, providing crystal-clear image quality. The series 8x8 matrix switcher allows users to route any input to any output, offering maximum flexibility in AV configurations. This means that users can easily switch between multiple sources without the need for complex wiring.

Another notable characteristic of the MVX 88 Series is its integrated scaling capabilities. Each output has a built-in video scaler that adjusts the input signal to match the required resolution of the display device. This technology enhances viewing experiences by eliminating compatibility issues, making it easier to connect different devices and ensuring optimal picture clarity.

The Extron MVX 88 Series also boasts advanced audio functionality. It features a built-in audio router and supports various audio formats, allowing users to manage audio signals alongside video. This capability is crucial for applications where synchronized audio and video output is essential, such as presentations and video conferences.

In terms of control, the MVX 88 Series is designed for ease of use. It includes an intuitive front panel interface, allowing users to quickly select inputs and outputs. Additionally, it supports various external control options, including RS-232 and Ethernet, making it compatible with a wide range of control systems. This adaptability simplifies integration into existing AV setups.

Durability and reliability are critical aspects of the MVX 88 Series. It is built to withstand rigorous daily use, featuring a robust enclosure that protects the internal components. Furthermore, Extron's commitment to quality ensures that users can depend on the MVX 88 for consistent performance in all applications.

Overall, the Extron MVX 88 Series stands out in the realm of AV matrix switchers, offering remarkable features, advanced technologies, and user-friendly characteristics that meet the demands of modern AV environments. Whether for classrooms, conference rooms, or control centers, the MVX 88 Series is an ideal solution for comprehensive audio and video management.