
Transition Networks |
Port Control
In Port control, you can view every port status that depended on user setting and the negotiation result.
1.Port: select the port that you want to configure.
2.State: Current port status. The port can be set to disable or enable mode. If the port setting is disable then will not receive or transmit any packet.
3.Negotiation: set auto negotiation status of port.
4.Speed: set the port link speed.
5.Duplex: set
6.Flow Control: set flow control function as Enable or Disable in Full Duplex mode. The default value is Enable.
7.Security: When its state is ‘On’ that means this port accepts only one MAC address which was configured to be a static MAC address.
8.Click
Apply .
Port Control interface
Technical Support: | International: |
69