Transition Networks SISGM1040-162D manual To apply the configuration

Transition Networks SISGM1040-162D-LR

to be the forwarding port of the Ring Master switch.

￿Enable Coupling Ring: To enable the coupling ring function. Marking the check box to enable the coupling ring function.

￿Coupling port: Assign the member port which is connected to the other ring group.

￿Control port: When Couple Ring check box is marked, you have to assign the control port to form a couple-ring group between the two X-rings.

￿Enable Dual Homing: Set up one of the ports on the switch to be the Dual Homing port. For a switch, there is only one Dual Homing port. Dual Homing only works while the X-Ring function enabled.

￿And then, click

Apply

to apply the configuration.

X-ring Interface

Note When the X-Ring function enable, user must disable the RSTP. The X-Ring function and RSTP function cannot exist in a switch at the same time. Remember to execute the ‘Save Configuration’ action, otherwise the new configuration will be lost when switch power is removed.

Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

98