Transition Networks SISGM1040-162D manual Tftp Commands Set, Disable reject accept, Authorize

Transition Networks			SISGM1040-162D-LR
8021x portstate	I	Use the 802.1x port	switch(config)#interface
[disable reject accept		state interface	fastethernet 3
authorize]		configuration	switch(config-if)#8021x portstate
		command to set the	accept
		state of the selected
		port.
show 8021x	E	Displays a summary of	switch>show 8021x
		the 802.1x properties
		and also the port
		sates.
no 8021x	G	Disable 802.1x	switch(config)#no 8021x
		function

TFTP Commands Set

Command	Level	Description	Defaults Example
backup	G	Save configuration to	switch(config)#backup
flash:backup_cfg		TFTP and need to	flash:backup_cfg
		specify the IP of TFTP
		server and the file name
		of image.
restore	G	Get configuration from	switch(config)#restore
flash:restore_cfg		TFTP server and need to	flash:restore_cfg
		specify the IP of TFTP
		server and the file name
		of image.
upgrade	G	Upgrade firmware by	switch(config)#upgrade
flash:upgrade_fw		TFTP and need to	flash:upgrade_fw
		specify the IP of TFTP
		server and the file name
		of image.

Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

40