NEC 790 manual Troubleshooting A-3

	Troubleshooting
Problem	Resolution
The touch screen does	Press Ctrl Alt = to calibrate the stylus input.
not respond.	Follow the on-screen instructions to
	complete the recalibration procedure.
	Reset the unit.
The soft reset button	Remove the main battery. Reinstall the
does not respond.	battery and make sure it is seated properly.
	Try resetting the unit again.
	If the soft reset button on the bottom of the
	unit does not respond, use the full reset
	button inside the battery bay. Refer to the
	section, “Resetting the MobilePro,” in
	Chapter 4.
	Caution: This second procedure may result
	in the loss of the memory contents including
	all stored data, settings, and files.
	Be sure to make regular backups.

For further assistance, call NEC Support Services at

1-800-632-4525

Note If you purchased this computer outside of the U.S. and Canada, please refer to the NEC Ultracare Warranty Terms and Conditions booklet that contains all necessary information to contact NEC CI Support Services in your country.

Troubleshooting A-3