!Configure the host PC's IP address on the MobilePro as follows:
1.Tap Start, Settings, Control Panel, and double tap the network icon.
2.Highlight NE2000 Compatible Ethernet Driver and select the Properties button.
3.In the IP address tab, select (place a dot beside) “Obtain an IP address via DHCP.”
4.Select the Name Servers tab and enter the host PC's IP address in the “Primary WINS” field.
To identify the host PC's IP address, run an IP config utility. In Windows 95, 98, and 2000, run Win IP Config. In Windows NT, run IP Config. If you need assistance, see your network administrator.
Installing ActiveSync
Follow these steps to install Microsoft ActiveSync for synchronization with Microsoft Outlook. The installation sequence may vary depending upon the Microsoft components installed on your host PC.
Note If your host PC uses the Windows NT operating system, you must install Windows NT Networking before installing Microsoft ActiveSync to your host PC.
1.Insert the Microsoft ActiveSync CD in the
!If auto insert is enabled on your host PC, the setup window appears.
!If auto insert is not enabled, go to Start, Run, browse for the
2.Click Next to start the Setup wizard. The Selection Installation folder appears.
3.Click Next to accept the default installation folder or modify the folder destination and click Next.
