4.Select the appropriate port setting, COM1 @ 57600, COM1 @ 9600, IrDA, LPT1, or Network.
5.Select other printing attributes as required.
6.Tap OK.
Note With the optional printer cable
For information about MobilePro accessories, access the web site
http://www.neccomp.com.1
1For U.S. and Canada only. If you purchased this computer outside the U.S. and Canada, contact a local NEC dealer in your country.
For additional details about using the IR port for printing and transferring data, refer to the section in Chapter 4, “Using the IR Port.”
Network Capabilities
Your MobilePro takes full advantage of the networking capability offered through Windows CE and the PC card port. The operating system supports Ethernet LAN and serial line interface protocol (SLIP) used with Cellular Digital Packet data (CDPD) so you can have cable- or wireless- based network communications using an Ethernet LAN PC card. In addition, you can use CompactFlash type II Ethernet cards on your NEC MobilePro.
Creating a Network (Ethernet) Connection
To create a network (Ethernet) connection, you must install and configure an Ethernet card. The drivers for the card may already exist on your device. NEC also has included drivers for the Proxim RangeLAN2.
1.Insert the Ethernet card into your device and connect it to your network cable. You must have an
You may see a message warning about battery power. If you have an A/C adapter, plug it into your device.