Electrolux TINSLB024MRR0, PN316902496 Before Operating, To set the clock, Stop/Clear, Procedure

12Before Operating

•Before operating your new Convection Micro- wave Oven make sure you read and understand this Use and Care Guide completely.

•Before the Convection Microwave Oven can be used, follow these procedures:

1.Plug in the oven. Close the door. The oven display will show ENJOY YOUR OVEN TOUCH CLEAR AND TOUCH CLOCK.

2.Touch the STOP/CLEAR pad. : will appear.

3.Set clock. See below.

To set the clock

•Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.).

Procedure

StepTouch/Display

This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display. Touch the STOP/CLEAR pad and re-enter the time.

•If the electrical power supply to your Convection

Microwave Oven should be interrupted, the dis- play will intermittently show ENJOY YOUR OVEN TOUCH CLEAR AND TOUCH CLOCK after the power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch STOP/CLEAR pad and reset the clock for the correct time of day.

NOTE

Your Convection Microwave Oven can be pro- grammed with the door open except for START, popcorn and reheat.

1.Touch set clock.

2.Enter the correct time of day by touching the numbers in sequence.

1230

3.Touch set clock again.

enter TIME

12:30

TOUCH CLOCK

12:30

Stop/Clear

Touch the STOP/CLEAR to:

1.Erase if you make a mistake during programming.

2.Cancel timer.

3.Stop the oven temporarily during cooking.

4.Return the time of day to the display.

5.Cancel a program during cooking, touch twice.

E