Chapter 3 Setting Up the Cisco Unified IP Phone
Attaching a Cisco Unified IP Phone Expansion Module
Attaching a Cisco Unified IP Phone Expansion Module
Cisco Unified IP Phone Expansion Modules can be attached to a Cisco Unified IP Phone 7965G to extend the number of line appearances or speed dial buttons. You can customize the button templates for the Cisco Unified IP Phone Expansion Module to determine the number of line appearances and speed dial buttons. See the “Modifying Phone Button Templates” section on page
Note Cisco Unified IP Phone Expansion Modules are not supported on the Cisco Unified IP Phone 7945G.
You can attach one or more Cisco Unified IP Phone Expansion Modules to the Cisco Unified
IP Phone 7965G by using one of the following methods:
•When you initially add the phone to Cisco Unified Communications Manager, by selecting 7914
•After the phone is configured in Cisco Unified Communications Manager.
To configure a Cisco Unified IP Phone Expansion Module on the Cisco Unified IP Phone, follow these steps:
Procedure
Step 1 Log in to Cisco Unified Communications Manager Administration.
Cisco Unified Communications Manager Administration window displays.
Step 2 From the menu, choose Device > Phone.
The Find and List Phone page appears. You can search for one or more phones that you want to configure for the Cisco Unified IP Phone Expansion Module 7914.
Step 3 Select and enter your search criteria and click Find.
The Find and List Phone window displays showing a list of the phones that match your search criteria.
Step 4 Click the IP Phone that you want to configure for the Cisco Unified IP Phone Expansion Module 7914.
The Phone Configuration window displays.
Step 5 Scroll to the Expansion Module Information section.
Step 6 To add support for one expansion module, in the Module 1 field, choose 7914
Module 7916.
To add support for a second expansion module, in the Module 2 field, choose 7914
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 7.0
| ||
|
