Chapter 3 Setting Up the Cisco Unified IP Phone
Understanding the Cisco Unified IP Phone 7965G and 7945G Components
•IP network that supports DHCP or manual assignment of IP address, gateway, and subnet mask
Note The Cisco Unified IP Phone displays the date and time from Cisco Unified Communications Manager. If the Cisco Unified Communications Manager server is located in a different time zone than the phones, the phones will not display the correct local time.
Cisco Unified Communications Manager Configuration
The Cisco Unified IP Phone requires Cisco Unified Communications Manager to handle call processing. Refer to Cisco Unified Communications Manager Administration Guide or to
If you plan to use
Cisco Unified Communications Manager before connecting any Cisco Unified IP Phone to the network. For information about enabling and configuring
Unified Communications Manager Administration Guide. Also, see the “Adding Phones to the Cisco Unified Communications Manager Database” section on page
You must use Cisco Unified Communications Manager to configure and assign telephony features to the Cisco Unified IP Phones. See the “Telephony Features Available for the Phone” section on page
In Cisco Unified Communications Manager, you can add users to the database and associate them with specific phones. In this way, users gain access to web pages that allow them to configure items such as call forwarding, speed dialing, and voice messaging system options. See the “Adding Users to Cisco Unified Communications Manager” section on page
Understanding the Cisco Unified IP Phone 7965G and 7945G Components
The Cisco Unified IP Phone 7965G and 7945G include these components on the phone or as accessories for the phone:
•Network and Access Ports, page 3-2
•Handset, page
•Speakerphone, page
•Headset, page 3-3
Network and Access Ports
The back of the Cisco Unified IP Phone includes these ports:
•Network
•Access
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 7.0
| ||
|
