AltiGen comm ACM 5.1 manual Internal Database Configuration Internal Log Service

Chapter 4: System Configuration

•How you want the system to manage an internal CDR database.

•If CDR needs to be output through a COM port to another computer, which COM port and which baud rate to use.

To learn more about internal and external CDR databases and schema, refer to the CDR Search Manual.

To set up Call Reports, select System > System Configuration, then click the Call Reports tab.

Figure 12. System Configuration, Call Reports tab

Internal Database Configuration (Internal Log Service)

The Internal Log Service (shown in the You can enable or disable the service, another Internal Log Service.

Log Service display table) is created by default. but you cannot remove this database or add

To manage the internal CDR database:

1.Make sure the Internal Log Service check box is checked.

2.In the Internal Database Configuration field, use the up/down arrows to select the Active database retaining period in months. This determines how long the data will be kept in the database. Valid entry is 1-12 months.

3.(Optional) In the Archive purged record(s) field, use the up/down arrows to select the number of months per archive file. This determines the number of months that the system will archive an existing CDR database before creating a new database.

4.Press OK or Apply.

70AltiWare ACM 5.1 Administration Manual