Chapter 25: Enterprise VoIP Network Management

To set IP address ranges and assign codec profiles to them, in AltiEnterprise Manager click the IP Codec tab.

By default, all private addresses are set to G.711 codec only. You can add individual IP addresses and address ranges and assign a codec to each.

To add IP addresses and address ranges and assign a codec

1.Click the Add button in the IP Device Range panel. The Add IP Device Range dialog box opens:

2.Enter an IP address range (for dynamic IP addressing), or enter the same address in each field if this is a static address. You cannot use the minimum and maximum values (0.0.0.0. and 255.255.255.255).

3.Click OK.

If you have multiple AltiGateways controlled by an AltiWare host system, you need to configure an Inter Gateway Codec profile.

AltiWare ACM 5.1 Administration Manual 331

Page 345
Image 345
AltiGen comm ACM 5.1 manual To add IP addresses and address ranges and assign a codec