AltiGen comm ACM 5.1 manual Trunk Configuration

Chapter 12: Trunk Configuration

transmit any data to the CO, the system will use DTMF as a way to transmit [Caller’s Extension Number] and [Target’s Extension Number] to the other side of the tie trunk. Because the format is AltiGen proprietary, you may have a problem if you enable this configuration when connecting to a non-AltiGen PBX.

•Holiday Profile—A holiday profile can be assigned to a trunk. The drop-down list selection is based on settings configured in the Holiday tab of System Configuration (see “Routing Calls on Holidays” on page 62).

•Business Hour Profile—A business hour profile can be assigned to a trunk. The drop-down list selection is based on settings configured in the Business Hours tab of System Configuration.

•Recording Option—Recording for incoming and outgoing calls is supported for Triton Analog, T1/E1, and IP trunks; use the drop-down list to select Disable or Enable.

•Trunk Properties—Opens a dialog box that allows you to configure low-level, hardware-specific properties for each trunk. The options vary depending on the type of board and trunk; this is discussed in subsequent sections.

AltiWare ACM 5.1 Administration Manual 153