AltiGen comm ACM 5.1 manual Type of Registered Services Provided, Service Order Code

Appendix B: Required Service Parameters

DNIS, Caller ID:

•DTMF (Dual Tone Multi-Frequency)

Physical Termination:

•RJ-48X or RJ-48C

Wire:

•4 wires

800Service:

• You decide

Termination Impedance:

•100 ohms

Type of Registered Services Provided

•BN 1.544 Mbps SF without power

•DN 1.544 Mbps SF B8ZS without power

•1KN 1.544 Mbps ANSI ESF without power

•1SN 1.544 Mbps ANSI ESF, B8ZS without power (recommended)

Service Order Code

SOC 6.0P AS.2

T1 Channel Assignment

•Trunk Type—In, Out, or 2-Way (recommended)

•Channels Assigned—24 (Enter partial channels if you wish to subscribe to both voice and data service.)

•Hunting—Most Idle, Least Idle, Ascend, Descend

•DNIS Digits/Signal—3/DTMF (can be 3 to 10 digits)

•Caller ID Signal—DTMF, if available (Not every service provider provides Caller ID over T1 lines.)

CSU/DSU Requirements

The CSU (channel service unit) is a device used to connect a digital trunk line coming in from the phone company to the PBX. A CSU can terminate signals, repeat signals and respond to loopback commands sent from the central office.

420AltiWare ACM 5.1 Administration Manual