AltiGen comm ACM 5.1 manual Blocking Calls to Area Codes from All Extensions

Chapter 4: System Configuration

Figure 9. System Configuration, Call Restriction tab

Blocking Calls to Area Codes from All Extensions

To add or edit system-prohibited area codes:

1.Double-click an index entry in System Prohibited Prefixes list, or select the index entry and click Edit. This opens a dialog box that allows you to enter a prefix number.

2.Enter a 1 and the dialing prefix to block (for example, 900, 976). You can enter up to 20 digits maximum for each prefix. For example, to block calls from all extensions to 976 numbers, type 1976.

3.Click Apply.

Note: A maximum of 20 prefixes can be defined.

Setting Local/Toll Free Area Codes

To add or remove local call definitions (calls that begin with 1 but are free: 800, 888), use the Add or Delete button in the Unrestricted Area Code panel, and click Apply. The area codes defined here will be considered “local” when configuring extension call restrictions.

AltiWare ACM 5.1 Administration Manual 67