AltiGen comm ACM 5.1 manual H323 Tie Trunk Properties, SIP Tie Trunk Properties

Chapter 12: Trunk Configuration

H323 Tie Trunk Properties

To open a trunk configuration dialog box for an H323 tie trunk, do one of the following:

•In the Trunk Configuration window, select an H323 trunk type, then click the Trunk Properties button.

•In the Board View window, double-click an H323 board type, then click the Board Configuration button.

Board configuration is discussed in “Configuring the H323SP Board” on page 143.

Max Trunk Channel sets the maximum number of trunk channels for this board in increments of 4, from 4 to 96. You need to stop and restart the system after the maximum trunk channel number is changed.

Note: This is signal only trunks. Make sure you have enough IP resource boards to cover your needs.

SIP Tie Trunk Properties

To open a configuration dialog box for a SIP tie-trunk channel, do one of the following:

•If you’re in the Trunk Configuration window, select a Triton VoIP channel from the trunk channels list, then click the Trunk Properties button, or just double-click the channel in the list.

•If you’re in the Trunk View window, right-click the channel and select Channel Properties.

The following dialog box opens:

Figure 4. Configuration dialog box for a Triton VoIP channel

See “Configuring the SIPSP Board” on page 142 for board configuration information.

Note: This is signal only trunks. Make sure you have enough IP resource boards to cover your needs.

154AltiWare ACM 5.1 Administration Manual