AltiGen comm ACM 5.1 manual Creating a Multi-site VoIP Domain, Publish as a global, Entry

	Chapter 25: Enterprise VoIP Network Management
Parameter	Description
Publish as a global	If you are adding a system or 3rd-party VoIP device
entry	that is not part of the VoIP domain, but you want it
	to be seen by all servers in the domain, check this
	box. (The entry will appear as “Global” in the Type
	column.) You can also globalize it later by selecting
	the entry in the IP Dialing Table and clicking the
	Publish as Global button below the table.

The Multi-site VoIP Domain

A group of AltiGen systems can form a VoIP domain where they share the same global extension directory and call routing rules. The VoIP domain is based on VoIP framework and uses IP tie-trunks to interconnect among different sites.

A domain is created in AltiWare Administrator. Here, a system is designated as the domain Master. Other AltiGen systems can then be added to a VoIP domain.

The VoIP domain Master maintains global configurations and propagates the configurations to all the members belonging to this domain automatically. Any changes in the global configuration are propagated in real time to the other members in the VoIP domain.

Creating a Multi-site VoIP Domain

To create a multi-site VoIP domain and designate a system as the domain Master:

1.Select VoIP > Multi-Site Domain Configuration. The AltiEnterprise Location Management window opens.

The name of the server appears in the Location Name field, and the name of your AltiGen product appears in the Switch Type field (AltiWare ACC or AltiWare ACM).

AltiWare ACM 5.1 Administration Manual 339