AltiGen comm ACM 5.1 manual Parameter Description First Digit Translator Configuration

Chapter 4: System Configuration

Parameter	Description
	First Digit Translator Configuration

Figure 3. Single Digit Routing

To set up a First Digit Translator entry, select the check box (to the left of 1-9, * or #), then enter the desired digits. When a box is checked, the digit preprocessor will replace the first digit 1-9, * or

#that user dials with the digits indicated in the corresponding field. In the above example, if a user dials “*”, the system replaces this with “911”.

Note: This feature is for internal extension users only. It does not support dialing out from voice mail. Improper configuration may cause conflict with the system numbering plan. Be sure to fully test any configuration change in this area before going “live.”

AltiWare ACM 5.1 Administration Manual 57