AltiGen comm ACM 5.1 manual To create a dialing pattern, To delete a dialing pattern

Chapter 14: Out Call Routing Configuration

•You would like to block a dialing pattern in addition to system restriction setting.

Dialing patterns are exceptions. If you can, minimize the number of dialing pattern entries. Most companies don’t need to create dialing patterns.

To create a dialing pattern

1.Click the Dialing Pattern tab on the Out Call Routing Configuration window.

Figure 3. Out Call Routing Configuration, Dialing Pattern tab

2.Click the Add button. The following dialog box appears:

3.Type in the prefix and pattern length, and click OK.

4.Assign routes to this prefix by selecting routes from the drop-down lists in the Route Priority section of the Dialing Pattern tab.

5.If this is a restricted number or pattern, skip step 4 and check the Disallow this dialing pattern check box.

To delete a dialing pattern

Select the pattern you want to delete, and click the Delete button.

186AltiWare ACM 5.1 Administration Manual