AltiGen comm ACM 5.1 manual To add members to a Paging Group

Chapter 20: Paging Group Configuration

To add members to a Paging Group:

1.On the Group Member tab of the Paging Group Configuration window, select the desired extension(s) in the Not Member list. Use Shift+click or Ctrl+click to select several extensions from the list.

2.Click the Add button to move them to the Member list.

Figure 2. Paging Group Configuration, Group Member tab

When a member is added, its default state is Login. Paging group members can use #54 to perform group login or #56 to log off. If a member is logged off, then it will not receive group paging.

To remove members assigned to a Paging Group:

1.On the Group Member tab of the Paging Group Configuration window, click the extension(s) you want to remove in the Member list.

2.Click the Remove button to move them to the Not Member List.

Important:

•If an IP phone in a different network segment needs to be in a paging group, you need to configure intermediate routers to pass through the IP multicast packets.

•IP paging to remote IP phones over WAN is not supported.

AltiWare ACM 5.1 Administration Manual 265