AltiGen comm ACM 5.1 manual Installing Outlook 2000/2003 Client on the AltiWare System

Chapter 27: Microsoft Exchange Integration

Select the new user name

Check Allow

Full control

Figure 11. Server Properties, Security tab

Installing Outlook 2000/2003 Client on the AltiWare System

Outlook 2000 has two modes: Internet Only mode and Corporate or Workgroup mode. To enable the Exchange Integration feature, you MUST configure it to use Corporate or Workgroup mode.

If you have already installed Outlook 2000 on the AltiWare system, make sure that you have installed it in the Corporate or Workgroup mode. This is discussed on page 370.

For Outlook 2003, all e-mail accounts should be configured to connect to Microsoft Exchange Server.

To install Outlook 2000 to Corporate or Workgroup mode

1.Install Outlook 2000 from the Outlook 2000 or Office 2000 CD. During installation, you will be prompted to choose a mode (Internet Only vs. Corporate or Workgroup). Make sure you choose the Corporate or Workgroup mode.

2.After installation is complete, start Outlook 2000 from Start > Programs. In the Microsoft Installer wizard, select Microsoft Exchange Server to install, then click Next.

AltiWare ACM 5.1 Administration Manual 367