Chapter 14: Out Call Routing Configuration

3.On the Dialing Pattern tab of the Out Call Routing Configuration window, add dialing pattern definition entries for the following prefixes:

prefix = 0, length = 11

prefix = 00, length = 14

prefixes = 1-9, each length = 7

In the Route Priority field, use the drop-down list to select the En-Blocroute definition (assigned in step 2).

The Dialing Pattern tab should look as follows:

With this configuration, the system will see that all digits have been collected and will send digits to the CO, instead of waiting 7 seconds for the dialing to finish.

AltiWare ACM 5.1 Administration Manual 191

Page 205
Image 205
AltiGen comm ACM 5.1 manual Out Call Routing Configuration