NETGEAR GS724T-300NAS manual GS724T Front and Back Panel Configuration, RS-232 Power Connector

GS716T/GS724T Hardware Installation Guide

•System LEDs

Figure 2-2illustrates the NETGEAR GS716T Smart Switch back panel:

RS-232 Power Connector

Figure 2-2

The back panel contains the following:

•A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord.

GS724T Front and Back Panel Configuration

The GS724T is a 24-port 10/100/1000 Mbps Smart Switch + 2 SFP Combo ports switch. Every RJ-45 port is capable of sensing the line speed and negotiating the operation duplex mode with the link partner automatically

Figure 2-3illustrates the NETGEAR GS724T Smart Switch front panel:

System LEDs

10/100/1000 Mbps Ethernet Ports SFP Ports

Figure 2-3

The front panel contains the following:

•24 RJ-45 connectors for 10/100/1000 Mbps auto-sensing Gigabit Ethernet switching ports.

•Two slots for SFP slots for SFP modules supporting 1000 (1000BASE-SX/LX)/100 Mbps SFP.

•Reset button to restart the device.

•Recessed default reset button to restore the device back to the factory defaults.

2-6 Physical Description

v1.0, January 2011