GS716T/GS724T Hardware Installation Guide

Auto-Negotiation

The RJ-45 ports negotiate the correct duplex mode and speed if the device at the other end of the link supports auto negotiation. If the device does not support auto negotiation, the switch only determines the speed correctly and the duplex mode defaults to half-duplex.

The gigabit port on the Gigabit module negotiates speed, duplex mode, and flow control, provided that the attached device supports auto-negotiation.

Troubleshooting

A-21

v1.0, January 2011

Page 26
Image 26
NETGEAR GS724T-300NAS manual Auto-Negotiation