Audio software

Take note of the following points to extend the life of your equipment. Always read the instructions provided with the software.

Discs

Choose discs with this mark:

Continued use of irregular shaped CDs can damage the unit.

Do not

• use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers.

• attach scratch-proof covers or any other kind of accessory.

write anything on the CD.

clean CDs with liquids.(Wipe with a soft, dry cloth.)

use CDs printed with label printers available on the market.

load a blank CD-R as it will cause abnormal malfunction and may damage the CD-R.

Cassette tapes

Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.

Tape slack can get caught up in the mechanism and should be taken up before the tape is played.

Endless tapes can get caught up in the deck’s moving parts if used incorrectly.

Specifications

Frequency range

 

 

FM

 

87.50–108.00 MHz (50 kHz steps)

AM

 

522–1629 kHz (9 kHz steps)

Sampling frequency

 

44.1kHz

Decoding

 

16 bit linear

Beam source

Semiconductor laser (wavelength 780 nm)

Bølgelengde

 

780 nm

Laser-styrke

 

Ingen farlig strålning sendes ut

No. of channels

 

(med sikkerhets-beskyttelse)

 

2 channel, stereo

Wow and flutter

Less than possible measurement data

D/A converter

 

1 bit DAC

Track system

 

4 track, 2 channel, stereo

Monitor system

 

Variable sound monitor

Recording system

 

AC bias

Erasing system

 

Multi Pole magnet

Frequency range

 

 

Normal position

 

50–12000 Hz

Speakers

 

10 cm 4 Ω x 2

Full range

 

Center speaker (RX-D19 only)

1.5 cm

Jacks

 

PHONES: 3.5 mm stereo (32 Ω)

Output

 

Power requirement

 

 

AC

 

230-240 V, 50 Hz

Battery

 

Power consumption: 11 W

9 V (Six R20/LR20, D, UM-1 batteries)

Memory back-up

• Do not use rechargeable type batteries.

6 V (Four R6/LR6, AA, UM-3 batteries)

Dimensions (WxHxD)

• Do not use rechargeable type batteries.

 

420 x 167 x 275 mm

Mass

 

(RX-D19) 3.6 kg without batteries

 

 

(RX-D17) 3.4 kg without batteries

Note

Specifications are subject to change without notice.

Mass and dimensions are approximate.

Troubleshooting guide

If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of Authorized Service Centers (enclosed with this unit) to locate a convenient service center, or consult your dealer for instructions.

Common Problem

The unit doesn’t work on batteries.

“UO1” is displayed.

Is the AC mains lead connected to the unit? Disconnect when using batteries.

Have the batteries been inserted correctly? Check that the poles (+ and –) are correctly aligned.

Replace the batteries or use household AC power.

CD

“E” is displayed.

Play doesn’t start or display is incorrect.

Indicates an incorrect operation. Read the instructions. Clean the CD.

Wait for an hour for condensation to dry, then try again. Make sure the label is facing up.

Replace the CD if it is scratched, warped, or irregularly shaped.

Cassette

Recording not possible.

Poor sound quality.

The cassette cannot be ejected or the lid can’t be closed when loading a cassette.

Has the cassette’s tab been removed? Cover the hole with adhesive tape. Clean the heads.

The batteries are flat. Replace the batteries or connect to household AC power. Press [/ PLAY] then [L/c STOP/EJECT].

Radio

A lot of noise.

Is another remote control being used? Use it further away from this unit.

 

 

 

Is a TV on? Move the unit away from the TV or turn it off.

Remote control

 

 

 

RX-D19 only

 

The remote control doesn’t work.

Check the batteries are inserted correctly. Replace the batteries if they are worn.

En

Matsushita Electric Industrial Co., Ltd.

Web Site: http://www.panasonic.co.jp/global/

RQT6341-B

L1101TC0

P8

8

11/21/01, 7:04 PM

Page 8
Image 8
Panasonic RX-D17, RX-D19 operating instructions Audio software, Specifications, Troubleshooting guide, Discs, Cassette tapes