AltiGen comm ACM 5.1 manual Backup and Restore Utility, To run the CT-Bus Test Tool

CT-Bus Test Tool

The CT-Bus Test Tool is a tool that detects one-way connection, cross talk, bad MVIP cable and static noise problems.

To run the CT-Bus Test Tool:

1.Stop AltiGen Switching Services before running this utility.

2.Launch CT-Bus Test Tool from Start > All Programs > AltiWare ACC/ACM > Gateway Tools > CT-Bus Test Tool.

3.Click Start to begin the test.

4.At the end of the test, the utility provides pass or fail results.

Backup and Restore Utility

To back up or restore data, select either

•From AltiWare Administrator: Services > Utilities > System Data Management, or

•From the Windows Start menu: All Programs > AltiWare ACC/ACM > Utilities > ACC/ACM Backup and Restore.

Figure 1. System Data Management window

Note: The System Data Management window can only be accessed at the primary AltiWare system; it is not available from a remote AltiWare Administrator client.

388AltiWare ACM 5.1 Administration Manual