Technical Configuration (T1/E1)

MultiVOIP User Guide

 

 

7.On the next screen you can select the COM port that the command PC will use when communicating with the MultiVoip unit. After software installation, the COM port can be re-set in the MultiVOIP Software (from the sidebar menu, select Connection Settings to access the COM Port Setup screen or use the keyboard shortcut Ctrl + G).

NOTE: If the COM port setting made here conflicts with the actual COM port resources available in the command PC, this error message will appear when the MultiVOIP program is launched. If this occurs, you must reset the COM port.

44

Page 44
Image 44
Multi-Tech Systems MultiVOIPTM, MVP-2410, MVP-3010 manual Technical Configuration T1/E1 MultiVOIP User Guide