MultiVOIP User Guide

 

Technical Configuration

 

 

 

 

 

 

 

 

 

 

 

SPP Call Signaling Parameter Definitions

 

 

 

(cont’d)

 

 

Field Name

 

Values

Description

 

 

Single Port Protocol (SPP)

 

 

 

[continued]

 

 

 

 

 

 

 

Client Options

Client Option fields are active

 

 

 

 

only in registrar/client mode

 

 

 

 

 

and only for client voip units.

 

 

Primary

 

--

This is the preferred SPP registrar

 

 

Registrar

 

 

gateway for controlling the traffic

 

 

 

 

 

of the current voip.

 

 

Alternate

 

--

A first and a second alternate SPP

 

 

Registrar 1 and

 

 

Registrar gateway can be

 

 

2

 

 

specified for use by the current

 

 

 

 

voip for situations where the

 

 

 

 

 

 

 

 

 

 

Primary Registrar gateway is busy

 

 

 

 

 

or otherwise unavailable.

 

 

Registrar IP

 

n.n.n.n

This is the IP address of the

 

 

Address

 

 

registrar voip to which this client

 

 

 

 

 

is assigned. (Default value =

 

 

 

 

 

0.0.0.0; effectively, there is no

 

 

 

 

 

useful default value.)

 

 

Registrar

 

10000 or

This is the port number of the

 

 

Port

 

other

registrar voip to which this

 

 

 

 

 

client is assigned. (Default port

 

 

 

 

 

number = 10000.)

 

 

Polling

 

integer

The interval between the voip

 

 

Interval

 

60 - 300

gateway’s successive attempts to

 

 

 

 

 

connect to and be governed by a

 

 

 

 

 

higher level SPP registrar gateway.

 

 

 

 

 

The Primary Registrar is the

 

 

 

 

 

highest level registrar gateway.

 

 

 

 

 

Alternate Registrar 1 is second;

 

 

 

 

 

Alternate Registrar 2 is the lowest

 

 

 

 

 

order SPP registrar gateway.

 

 

Registrar Options

Registrar Option fields are

 

 

 

 

 

active only in registrar/client

 

 

 

 

 

mode and only for registrar

 

 

 

 

 

voip units.

 

 

Keep Alive

 

30 – 300

Time-out duration before a

 

 

(in sec.)

 

(seconds)

registrar will unregister a

 

 

 

 

 

client that does not send its

 

 

 

 

 

“I’m here” signal. Client

 

 

 

 

 

normally sends its “I’m here”

 

 

 

 

 

signal every 20 seconds.

 

 

 

 

 

Timeout default = 60 seconds.

 

119

Page 119
Image 119
Multi-Tech Systems E1, MultiVOIPTM, MVP-2410, MVP-3010 manual Address, 119