Multi-Tech Systems MultiVOIPTM, MVP-2410, MVP-3010, E1 manual 129, MVP810ST

MultiVOIP User Guide			Technical Configuration
	“Regional Parameter” Definitions (cont’d)
	Field Name	Values	Description
	Country	country name	MultiVOIP units operating with the
	Selection for		X.06 software release (and above)
			include a built-in modem. The
	Built-In
			administrator can dial into this modem
	Modem
			to configure the MultiVOIP unit
	(not applicable		remotely. The country name values in
	to MVP-		this field set telephony parameters that
	130/130FXS		allow the modem to work in the listed
			country. This value may be different
	MVP210,
			than the Country/Region value. For
	MVP410ST, or
			example, a user may need to choose
	MVP810ST)		“Europe” as the Country/Region value
			but “Denmark” as the Country-
			Selection-for-Built-In-Modem value.
	User Defined Tones fields
	Type column	alphanumeric	Name of supervisory tone pair.
		name specified	Cannot be same as name of any
		by user	standard tone pair.
	Frequency 1	freq. in Hertz	Lower frequency of pair.
	Frequency 2	freq. in Hertz	Higher frequency of pair.
	Gain 1	gain in dB	Amplification factor of lower
		+3dB to –31dB	frequency of pair.
		and “mute” setting	This applies to any supervisory tones
			that the MultiVOIP outputs as audio to
			the FXS, FXS, or E&M port. Default: -
			16dB
	Gain 2	gain in dB	Amplification factor of higher
		+3dB to –31dB	frequency of pair.
		and “mute” setting	This applies to any supervisory tones
			that the MultiVOIP outputs as audio to
			the FXS, FXO, or E&M port. Default: -
			16dB
	Cadence	n/n/n/n	On/off pattern of tone durations used
	(msec) On/Off	four integer time	to denote supervisory tones specified
		values in	by user. Supervisory tones relate to
		milli-seconds;	answering and disconnection of calls.
		zero value for	Although most cadences have only two
		dial-tone	parts (an “on” duration and an “off”
		indicates	duration), some telephony cadences
		continuous tone	have four parts. Most cadences, then,
			are expressed as two iterations of a two-
			part sequence. Although this is
			redundant, it is necessary to allow for
			expression of 4-part cadences.

129