Multi-Tech Systems MVP-2410, MVP-3010, MultiVOIPTM, E1 manual LED Name Description

Overview MultiVOIP User Guide

	MVP2410 Front Panel LED Definitions
LED NAME		DESCRIPTION
Power		Indicates presence of power.
Boot		After power up, the Boot LED will be on for about 10
		seconds while the MVP2410 is booting.
FDX		Full-Duplex & Collision LED. This LED indicates
		whether the Ethernet connection is half-duplex or full-
		duplex (FDX) and, in half-duplex mode, indicates
		occurrence of data collisions. LED is on constantly for
		full-duplex mode; LED is off constantly for half-duplex
		mode. When operating in half-duplex mode, the LED
		will flash during data collisions.
LNK		Link/Activity LED. This LED is lit if Ethernet
		connection has been made. It is off when the link is
		down (i.e., when no Ethernet connection exists). While
		link is up, this LED will flash off to indicate data
		activity.
T1		When lit, indicates presence of T1 connection.
E1		E1. Not supported.
PRI		PRI. On if T1 line is of ISDN-Primary-Rate type.
ONL		Online. This LED is on when frame synchroni-
		zation has been established on the T1/E1 link.
IC		IC LED is on when Internal Clocking is selected in
		T1/E1 configuration.
LC		Indicates Loss of Carrier.
LS		Indicates Loss of Signal.
Test		For testing purposes only.

16