Multi-Tech Systems E1, MultiVOIPTM, MVP-2410, MVP-3010 manual 215

Models: MVP-2410, MVP-3010 MultiVOIPTM E1

1 395
Download 395 pages 41.89 Kb
Page 215
Image 215

MultiVOIP User Guide

E1 PhoneBook Configuration

 

 

In order for any VOIP phone call to be made, there must be both an Inbound Phonebook entry and an Outbound Phonebook entry that describe the end-to-end connection. The phone station originating the call must be connected to the VOIP system. The Outbound Phonebook for that VOIP unit must have a destination pattern entry that includes the ‘called’ phone (that is, the phone completing the call). The Inbound Phonebook of the VOIP where the call is completed must have a destination pattern entry that includes the digit sequence dialed by the originating phone station.

The PhoneBook Configuration procedure below is brief, but it is followed by an example case. For many people, the example case may be easier to grasp than the procedure steps. Configuration is not difficult, but all phone number sequences, destination patterns, and other information must be entered exactly; otherwise connections will not be made.

215

Page 215
Image 215
Multi-Tech Systems E1, MultiVOIPTM, MVP-2410, MVP-3010 manual 215